108/1/6 Đường Nguyễn Văn Khối, P. Thông Tây Hội, TP.HCM. 0522 388 688

Switch Cisco Catalyst C1200-48T-4X-EU 48 cổng Gigabit, uplink 4 x 10G SFP+, Layer 2

Cisco Catalyst C1200-48T-4X-EU là switch quản lý Layer 2 dòng Catalyst 1200 dành cho doanh nghiệp nhỏ và vừa, kế nhiệm Cisco Business CBS250 và Catalyst 1000 đã ngừng bán. Máy có 48 x 10/100/1000, uplink 4 x 10G SFP+, cấu hình bằng web, CLI hoặc ứng dụng Cisco Business Mobile, bảo hành trọn đời giới hạn. Phù hợp văn phòng 24 tới 96 máy, cửa hàng, trường học cần switch dễ dùng nhưng đủ tính năng bảo
Cisco Catalyst C1200-48T-4X-EU, Switch Cisco Catalyst C1200-48T-4X-EU 48 cổng Gigabit, uplink 4 x 10G SFP+, Layer 2
(5/ 19 bởi 3981 lượt đánh giá )
Giá bán: Vui lòng liên hệ
(Gọi điện, chat Zalo gửi Email nhận báo giá cực tốt)
Sản phẩm chính hãng ®
Code: #6156
Tình trạng: Có hàng (tại Hà Nội và Hồ Chí Minh)
Hà Nội: 024.22255666 - HCM: 028.62959919
Số di động: 0522 388 688 (Hỗ trợ 24/7)
Nhận yêu cầu báo giá: info@thietbimangcisco.vn
Hợp Nhất Group Since 2010
Hồ Chí Minh: 108/1/6 Đường Nguyễn Văn Khối, P. Thông Tây Hội, TP.HCM.
Hà Nội: Liền kề TT17-B4 Khu đô thị Văn Quán, Hà Đông, Hà Nội
  • Đổi trả miễn phí trong vòng 7 ngày
  • Bảo hành chính hãng trên toàn quốc
  • Sản phẩm mới 100% nguyên seal
  • Giao hàng miễn phí toàn quốc, tất cả các ngày trong tuần

Cisco Catalyst C1200-48T-4X-EU là switch quản lý Layer 2 dòng Catalyst 1200 dành cho doanh nghiệp nhỏ và vừa, kế nhiệm Cisco Business CBS250 và Catalyst 1000 đã ngừng bán. Máy có 48 x 10/100/1000, uplink 4 x 10G SFP+, cấu hình bằng web, CLI hoặc ứng dụng Cisco Business Mobile, bảo hành trọn đời giới hạn. Phù hợp văn phòng 24 tới 96 máy, cửa hàng, trường học cần switch dễ dùng nhưng đủ tính năng bảo mật. Thiết Bị Mạng Cisco bán hàng chính hãng, đủ CO/CQ, giao toàn quốc.

Các model Catalyst 1200 đang bán

ModelCổngPoEUplink
C1200-48T-4X-EU48Không4 x 10G SFP+
C1200-8T-D-EU8KhôngSFP
C1200-8T-E-2G-EU8KhôngSFP
C1200-8P-E-2G-EU8PoE+SFP
C1200-8FP-2G-EU8PoE+ đủ công suất2 x 1G SFP
C1200-16T-2G-EU16Không2 x 1G SFP
C1200-16P-2G-EU16PoE+2 x 1G SFP
C1200-24T-4G-EU24Không4 x 1G SFP

Điểm nổi bật

  • 48 x 10/100/1000, uplink 4 x 10G SFP+; băng thông 176 Gbps.
  • Layer 2 đầy đủ VLAN, QoS, LACP, định tuyến tĩnh cơ bản.
  • Cài đặt trong vài phút bằng Cisco Business Dashboard hoặc ứng dụng di động; theo dõi từ xa.
  • Bảo mật doanh nghiệp: 802.1X, ACL, DHCP snooping, chống giả ARP, bảo vệ vòng lặp.
  • Lắp rack 1U, quạt êm, bảo hành trọn đời.

Ứng dụng và triển khai

Cisco Catalyst C1200-48T-4X-EU hợp mạng văn phòng, cửa hàng, phòng khám, trường học: nối máy tính, máy in; uplink 4 x 10G SFP+ về router hoặc switch lõi. Doanh nghiệp đang dùng CBS250, SG300/SG350 hay Catalyst 1000 chuyển sang 1200 giữ nguyên cách cấu hình web quen thuộc, thêm bảo hành trọn đời và cập nhật phần mềm dài hạn từ Cisco.

Sản phẩm dùng kèm

Khi mua Cisco Catalyst C1200-48T-4X-EU, khách hàng thường lấy thêm module quang Cisco GLC-SX-MMD, module quang Cisco GLC-LH-SMD, access point Cisco Catalyst 9115AXIđiện thoại IP Cisco 7841 để đủ bộ triển khai. Thiết Bị Mạng Cisco tư vấn cấu hình và báo giá chung một đơn.

Giá bán và đặt hàng

Cisco Catalyst C1200-48T-4X-EU bán theo báo giá, giá tốt theo số lượng và dự án. Gọi hotline hoặc gửi yêu cầu để nhận giá, tồn kho và thời gian giao. Hàng chính hãng Cisco, đủ CO/CQ, xuất hoá đơn VAT, bảo hành theo chính sách Cisco Việt Nam.

Thông số kỹ thuật Cisco Catalyst C1200-48T-4X-EU

Thông số chính Cisco Catalyst C1200-48T-4X-EU
Mã sản phẩmC1200-48T-4X-EU
DòngCisco Catalyst 1200 Series
Cổng truy cập48 x 10/100/1000
Uplink4 x 10G SFP+
Băng thông chuyển mạch176 Gbps
Tốc độ chuyển tiếp130.94 Mpps
Quản trịWeb GUI, CLI, SNMP, Cisco Business Dashboard, ứng dụng Cisco Business Mobile
LớpLayer 2 + định tuyến tĩnh
Bảo mật802.1X, ACL, DHCP snooping, IP Source Guard, Dynamic ARP Inspection
QuạtQuạt tích hợp
Bảo hànhTrọn đời có giới hạn của Cisco
Product specifications
Switching capacity and forwarding rate – Capacity in millions of packets per second (mpps) (64-byte packets)130.94
Switching capacity and forwarding rate – Switching capacity in gigabits per second (Gbps)176
Power consumption – System power consumption110V=40.01W 220V=39.77W
Power consumption – Heat dissipation (BTU/hr)136.50
Power consumption – Idle Power110V=13.12W 220V=12.93W
Ports – Total system ports48x Gigabit Ethernet + 4x 10 Gigabit Ethernet
Ports – RJ-45 ports48x Gigabit Ethernet
Ports – Combo ports (RJ-45 + Small Form-Factor Pluggable [SFP])4x SFP+
Packet buffer – All numbers are aggregate across all ports because the buffers are dynamically shared. – Packet buffer3 MB
Unit dimensions – Dimensions445 x 288 x 44 mm (17.5 x 11.33 x 1.73 in)
Unit weight3.95 kg (8.71 lb)
Acoustic noise and mean time between failures – Fan (number)1
Acoustic noise and mean time between failures – Acoustic noise25°C: 29.7 dBA
Acoustic noise and mean time between failures – MTBF at 25°C (hours)1,452,667
Spanning Tree Protocol (STP)Standard 802.1d spanning tree support Fast convergence using 802.1w (Rapid Spanning Tree Protocol [RSTP]), enabled by default Multiple spanning tree instances using 802.1s (MSTP); 8 instances are supported Per-VLAN Spanning Tree Plus (PVST+); 126 instances are supported Rapid PVST+ (RPVST+); 126 instances are supported
Port grouping/link aggregationSupport for IEEE 802.3ad Link Aggregation Control Protocol (LACP) ● Up to 4 groups ● Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad Link Aggregation Group (LAG)
VLANSupport for up to 255 active VLANs simultaneously Port-based and 802.1Q tag-based VLANs Management VLAN Guest VLAN Auto Surveillance VLAN (ASV)
Voice VLANVoice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers networkwide zero-touch deployment of voice endpoints and call control devices
Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snoopingLimits bandwidth-intensive multicast traffic to only the requesters; supports 255 multicast groups (source-specific multicasting is also supported)
IGMP querierUsed to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
Loopback detectionProvides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP
IPv4 routingWire-speed routing of IPv4 packets Up to 32 static routes and up to 16 IP interfaces
IPv6 routingWire-speed routing of IPv6 packets
Layer 3 interfaceConfiguration of Layer 3 interface on physical port, LAG, VLAN interface, or loopback interface
User Datagram Protocol (UDP) relayRelay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BootP)/DHCP packets
Secure Sockets Layer (SSL)Encrypts all HTTPS traffic, allowing secure access to the browser-based management GUI in the switch
SSH ProtocolSSH is a secure replacement for Telnet traffic. Secure Copy (SCP) also uses SSH. SSH v1 and v2 are supported.
IEEE 802.1X (authenticator role)RADIUS authentication, guest VLAN, single/multiple host mode, and single/multiple sessions
STP loopback guardProvides additional protection against Layer 2 forwarding loops (STP loops)
Secure Core Technology (SCT)Ensures that the switch will receive and process management and protocol traffic no matter how much traffic is received
Secure Sensitive Data (SSD)A mechanism to manage sensitive data (such as passwords, keys, and so on) securely on the switch, populating this data to other devices and a secure auto-configuration. Access to view the sensitive data as plain text or encrypted is provided according to the user-configured access level and the access method of the user
Trustworthy systemsTrustworthy systems provide a highly secure foundation for Cisco products Run-time defenses (Executable Space Protection [X-Space], Address Space Layout Randomization [ASLR], Built-In Object Size Checking [BOSC])
Port securityAbility to lock source MAC addresses to ports and limit the number of learned MAC addresses
Storm controlBroadcast, multicast, and unknown unicast
Multiple user privilege levels in CLILevel 1, 7, and 15 privilege levels
ACLsSupport for up to 512 rules Drop or rate limit based on source and destination MAC, VLAN ID, IPv4 or IPv6 address, IPv6 flow label, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, TCP/UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag; ACL can be applied on both ingress and egress sides Time-based ACLs supported
Priority levels8 hardware queues
SchedulingStrict priority and Weighted Round-Robin (WRR) queue assignment based on DSCP and Class of Service (802.1p/CoS)
Class of servicePort based, 802.1p VLAN priority based, IPv4/v6 IP precedence/Type of Service (ToS)/DSCP based, Differentiated Services (DiffServ), classification and re-marking ACLs, trusted QoS
Rate limitingIngress policer, egress shaping and rate control per VLAN, per port, and flow based
Congestion avoidanceA TCP congestion avoidance algorithm is required to reduce and prevent global TCP loss synchronization
StandardsIEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad Link Aggregation Control Protocol, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.3 ad LACP, IEEE 802.1D (STP), IEEE 802.1Q/p VLAN, IEEE 802.1w RSTP, IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, IEEE 802.3at, RFC 768, RFC 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 879, RFC 896, RFC 826, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 920, RFC 922, RFC 950, RFC 951, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1157, RFC 1213, RFC 1215, RFC 1286, RFC 1350, RFC 1442, RFC 1451, RFC 1493, RFC 1533, RFC 1541, RFC 1542, RFC 1573, RFC 1624, RFC 1643, RFC 1700, RFC 1757, RFC 1867, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2030, RFC 2131, RFC 2132, RFC 2233, RFC 2576, RFC 2616, RFC 2618, RFC 2665, RFC 2666, RFC 2674, RFC 2737, RFC 2819, RFC 2863, RFC 3164, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC 3416, RFC 4330
IPv6IPv6 host mode IPv6 over Ethernet Dual IPv6/IPv4 stack IPv6 Neighbor Discovery (ND) IPv6 stateless address auto-configuration Path Maximum Transmission Unit (MTU) discovery Duplicate Address Detection (DAD) ICMP version 6 IPv6 over IPv4 network with Intrasite Automatic Tunnel Addressing Protocol (ISATAP) support
IPv6 QoSPrioritizes IPv6 packets in hardware
IPv6 ACLDrop or rate-limit IPv6 packets in hardware
Multicast Listener Discovery (MLD v1/2) snoopingDelivers IPv6 multicast packets only to the required receivers
IPv6 applicationsWeb/SSL, Telnet server/SSH, Ping, Traceroute, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), Simple Network Management Protocol (SNMP), RADIUS, Syslog, DNS client, DHCP client, DHCP auto-configuration
IPv6 RFCs supportedRFC 4443 (which obsoletes RFC 2463): ICMPv6 RFC 4291 (which obsoletes RFC 3513): IPv6 address architecture RFC 4291: IPv6 addressing architecture RFC 2460: IPv6 specification RFC 4861 (which obsoletes RFC 2461): neighbor discovery for IPv6 RFC 4862 (which obsoletes RFC 2462): IPv6 stateless address auto-configuration RFC 1981: path MTU discovery RFC 4007: IPv6 scoped address architecture RFC 3484: default address selection mechanism RFC 5214 (which obsoletes RFC 4214): ISATAP tunneling RFC 4293: MIB IPv6: textual conventions and general group RFC 3595: textual conventions for IPv6 flow label
Cisco Business DashboardSupport for embedded probe for Cisco Business Dashboard running on the switch. Eliminates the need to set up a separate hardware or virtual machine for the Cisco Business Dashboard probe onsite
Cisco Business mobile appMobile app for Cisco Business switch and wireless products. Helps to set up a local network in minutes and provide easy management at your fingertips.
Cisco Network Plug and Play (PnP) agentThe Cisco Network PnP solution provides a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or for provisioning updates to an existing network. The solution provides a unified approach to provision Cisco routers, switches, and wireless devices with a near-zero-touch deployment experience. Supports Cisco PnP Connect
Web user interfaceBuilt-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS). Supports configuration, wizards, system dashboard, system maintenance, and monitoring Basic and advanced mode for maximum operational efficiency
SNMPSNMP versions 1, 2c, and 3 with support for traps, and SNMP v3 User-Based Security Model (USM)
Remote Monitoring (RMON)Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis
IPv4 and IPv6 dual stackCoexistence of both protocol stacks to ease migration
Firmware upgradeWeb browser upgrade (HTTP/HTTPS) and TFTP and upgrade over SCP running over SSH Dual images for resilient firmware upgrades
Port mirroringTraffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 4 source ports can be mirrored to one destination port
VLAN mirroringTraffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 4 source VLANs can be mirrored to one destination port
DHCP (options 12, 59, 60, 66, 67, 125, 129, and 150)DHCP options facilitate tighter control from a central point (DHCP server) to obtain IP address, auto-configuration (with configuration and image file download), DHCP relay, and hostname
Secure Copy (SCP)Securely transfers files to and from the switch
Auto-configuration with SCP file downloadEnables mass deployment with protection of sensitive data
Text-editable configurationsConfiguration files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment
SmartportsSimplified configuration of QoS and security capabilities
Auto SmartportsAutomatically applies the intelligence delivered through the Smartports roles to the port based on the devices discovered over Cisco Discovery Protocol or LLDP-MED. This facilitates zero-touch deployments
Text view CLIScriptable CLI. A full CLI as well as a menu-based CLI is supported. User privilege levels 1, 7, and 15 are supported for the CLI
LocalizationLocalization of GUI and documentation into multiple languages
Login bannerConfigurable multiple banners for web as well as CLI
Other managementTraceroute, single IP management, HTTP/HTTPS, RADIUS, port mirroring, TFTP upgrade, DHCP client, SNTP, cable diagnostics, Ping, syslog, Telnet client (SSH secure support), automatic time settings from management station
Energy detectAutomatically turns power off on an RJ-45 port when the detecting link down. Active mode is resumed without loss of any packets when the switch detects the link is up
Cable length detectionAdjusts the signal strength based on the cable length. Reduces the power consumption for shorter cables
EEE compliant (802.3az)Supports IEEE 802.3az on all copper Gigabit Ethernet ports
Disable port LEDsLEDs can be manually turned off to save energy
Time-based port operationLink up or down based on user-defined schedule (when the port is administratively up)
Time-based PoEPoE power can be on or off based on user-defined schedule to save energy
Perpetual PoEProvides PoE power to connected powered devices while the device is rebooting
Jumbo framesFrame sizes up to 9000 bytes. The default MTU is 2000 bytes
MAC table8000 addresses
Chip guardDetects tampering attempts and responds during boot-up
Boot integrityBoot integrity visibility allows Cisco's platform identity and software integrity information to be visible and actionable
BonjourThe switch advertises itself using the Bonjour protocol
Cisco Discovery ProtocolThe switch advertises itself using the Cisco Discovery Protocol. It also learns the connected device and its characteristics using Cisco Discovery Protocol
PoE Powered Device (PD)Select compact switch models can work as PoE PDs and be powered by upstream PoE switches When AC power is connected and functioning correctly, it is preferred over PoE power. The PoE power can function as a backup to the AC power source or be used as the sole power source for the switch
Console portCisco Standard RJ-45 console and USB Type C port* *Not available on C1200-8T-D
USB portUSB Type C port on the front panel of the switch for easy file and image management as well as console port
Cabling typeUnshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T
Flash512 MB
CPUDual-core ARM at 1.4 GHz
DRAM1 GB DDR4
Packet bufferAll numbers are aggregate across all ports because the buffers are dynamically shared.
Power100 to 240V 50 to 60 Hz, internal, universal: C1200-8FP-2G, C1200-16T-2G, C1200-16P-2G, C1200-24T-4G, C1200-24P-4G, C1200-24FP-4G, C1200-48T-4G, C1200-48P-4G, C1200-24T-4X, C1200-24P-4X, C1200-24FP-4X, C1200-48T-4X, C1200-48P-4X 100 to 240V 50 to 60 Hz, external: C1200-8T-D, C1200-8T-E-2G, C1200-8P-E-2G
CertificationsUL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A
Operating temperature32° to 122°F (0° to 50°C) for C1200-8T-D 23° to 122°F (-5° to 50°C) for other models
Storage temperature-13° to 158°F (-25° to 70°C)
Operating humidity10% to 90%, relative, noncondensing
Storage humidity10% to 90%, relative, noncondensing

Mục Lục Cisco Catalyst C1200-48T-4X-EU

  1. Giá Cisco Catalyst C1200-48T-4X-EU List price
  2. Cisco Catalyst C1200-48T-4X-EU datasheet specs
  3. Báo giá Cisco Catalyst C1200-48T-4X-EU Price list
  4. Cisco Catalyst C1200-48T-4X-EU chính hãng
  5. Liên hệ mua Cisco Catalyst C1200-48T-4X-EU giá tốt
  6. Hỗ trợ sản phẩm Cisco Catalyst C1200-48T-4X-EU
Cam kết hoàn tiền gấp 100 lần nếu phát hiện sản phẩm Cisco Catalyst C1200-48T-4X-EU kém chất lượng từ Hợp Nhất group

Mua cùng Cisco Catalyst C1200-48T-4X-EU ?

Sản phẩm cùng loại

Phân phối Cisco chính hãng tại Việt Nam
Thông tin liên hệ
Hồ Chí Minh: 028.62959919
Máy bàn Hà Nội: 024.22255666
Số di động tư vấn: 0522 388 688
Email: info@thietbimangcisco.vn
Mua sản phẩm Cisco Catalyst C1200-48T-4X-EU tại Hợp Nhất nhà cung cấp thiết bị mạng Cisco uy tín, danh tiếng 10 năm để đảm bảo sản phẩm chính hãng. Tránh nguy cơ mua phải sản phẩm kém chất lượng...
Câu hỏi thường gặp
C1200-48T-4X-EU là switch Layer 2 hay Layer 3?
Layer 2 có định tuyến tĩnh cơ bản.
C1200-48T-4X-EU thay cho CBS250 hay Catalyst 1000 được không?
Được, cùng số cổng và cùng cách quản trị web; Cisco chỉ định Catalyst 1200 là đích thay thế khi ngừng bán CBS250 (10/2024) và Catalyst 1000 (04/2025).
Có cần giấy phép hay thuê bao không?
Không. Catalyst 1200 không cần giấy phép, không thuê bao, cập nhật phần mềm miễn phí; bảo hành trọn đời giới hạn của Cisco.