Switch Cisco Catalyst 1300-24FP-4G-EU 24 cổng Gigabit PoE+ đủ công suất, uplink 4 x 1G SFP, Layer 3
Cisco Catalyst 1300-24FP-4G-EU là switch quản lý Layer 3 dòng Catalyst 1300 dành cho doanh nghiệp nhỏ và vừa, kế nhiệm Cisco Business CBS350 và Catalyst 1000 đã ngừng bán. Máy có 24 x 10/100/1000 PoE+ đủ công suất, uplink 4 x 1G SFP, cấu hình bằng web, CLI hoặc ứng dụng Cisco Business Mobile, bảo hành trọn đời giới hạn. Phù hợp văn phòng 12 tới 48 máy, cửa hàng, trường học cần switch dễ dùng nhưng
Giá bán: Vui lòng liên hệ
(Gọi điện, chat Zalo gửi Email nhận báo giá cực tốt)
Sản phẩm chính hãng ®
Code: #6169
Tình trạng: Có hàng (tại Hà Nội và Hồ Chí Minh)
Hà Nội: 024.22255666 - HCM: 028.62959919
Số di động: 0522 388 688 (Hỗ trợ 24/7)
Nhận yêu cầu báo giá: info@thietbimangcisco.vn
Hợp Nhất Group Since 2010
Hồ Chí Minh: 108/1/6 Đường Nguyễn Văn Khối, P. Thông Tây Hội, TP.HCM.
Hà Nội: Liền kề TT17-B4 Khu đô thị Văn Quán, Hà Đông, Hà Nội
Cisco Catalyst 1300-24FP-4G-EU là switch quản lý Layer 3 dòng Catalyst 1300 dành cho doanh nghiệp nhỏ và vừa, kế nhiệm Cisco Business CBS350 và Catalyst 1000 đã ngừng bán. Máy có 24 x 10/100/1000 PoE+ đủ công suất, uplink 4 x 1G SFP, cấu hình bằng web, CLI hoặc ứng dụng Cisco Business Mobile, bảo hành trọn đời giới hạn. Phù hợp văn phòng 12 tới 48 máy, cửa hàng, trường học cần switch dễ dùng nhưng đủ tính năng bảo mật. Thiết Bị Mạng Cisco bán hàng chính hãng, đủ CO/CQ, giao toàn quốc.
Thông số kỹ thuật Cisco Catalyst 1300-24FP-4G-EU
| Mã sản phẩm | C1300-24FP-4G-EU |
|---|---|
| Dòng | Cisco Catalyst 1300 Series |
| Cổng truy cập | 24 x 10/100/1000 PoE+ đủ công suất |
| Uplink | 4 x 1G SFP |
| Băng thông chuyển mạch | 56 Gbps |
| Tốc độ chuyển tiếp | 41.67 Mpps |
| Quản trị | Web GUI, CLI, SNMP, Cisco Business Dashboard, ứng dụng Cisco Business Mobile |
| Lớp | Layer 3 (định tuyến tĩnh, RIP, IPv6) |
| Bảo mật | 802.1X, ACL, DHCP snooping, IP Source Guard, Dynamic ARP Inspection |
| Quạt | Quạt tích hợp |
| Bảo hành | Trọn đời có giới hạn của Cisco |
Các model Catalyst 1300 đang bán
| Model | Cổng | PoE | Uplink |
|---|---|---|---|
| C1300-24FP-4G-EU | 24 | PoE+ đủ công suất | 4 x 1G SFP |
| C1300-8T-E-2G-EU | 8 | Không | SFP |
| C1300-8P-E-2G-EU | 8 | PoE+ | SFP |
| C1300-8FP-2G-EU | 8 | PoE+ đủ công suất | 2 x 1G SFP |
| C1300-16T-2G-EU | 16 | Không | 2 x 1G SFP |
| C1300-16P-2G-EU | 16 | PoE+ | 2 x 1G SFP |
| C1300-16FP-2G-EU | 16 | PoE+ đủ công suất | 2 x 1G SFP |
| C1300-24T-4G-EU | 24 | Không | 4 x 1G SFP |
Điểm nổi bật
- 24 x 10/100/1000 PoE+ đủ công suất, uplink 4 x 1G SFP; băng thông 56 Gbps.
- Định tuyến Layer 3 tĩnh, RIP, VLAN liên mạng và stacking tới 8 máy trên bản 4X/XS.
- Cài đặt trong vài phút bằng Cisco Business Dashboard hoặc ứng dụng di động; theo dõi từ xa.
- Bảo mật doanh nghiệp: 802.1X, ACL, DHCP snooping, chống giả ARP, bảo vệ vòng lặp.
- PoE cấp nguồn cho camera, điện thoại IP, access point; ngân sách theo model.
Ứng dụng và triển khai
Cisco Catalyst 1300-24FP-4G-EU hợp mạng văn phòng, cửa hàng, phòng khám, trường học: nối máy tính, máy in, camera IP và access point qua PoE; uplink 4 x 1G SFP về router hoặc switch lõi. Doanh nghiệp đang dùng CBS350, SG300/SG350 hay Catalyst 1000 chuyển sang 1300 giữ nguyên cách cấu hình web quen thuộc, thêm bảo hành trọn đời và cập nhật phần mềm dài hạn từ Cisco.
Sản phẩm dùng kèm
Khi mua Cisco Catalyst 1300-24FP-4G-EU, khách hàng thường lấy thêm module quang Cisco GLC-SX-MMD, module quang Cisco GLC-LH-SMD, access point Cisco Catalyst 9115AXI và điện thoại IP Cisco 7841 để đủ bộ triển khai. Thiết Bị Mạng Cisco tư vấn cấu hình và báo giá chung một đơn.
Giá bán và đặt hàng
Cisco Catalyst 1300-24FP-4G-EU bán theo báo giá, giá tốt theo số lượng và dự án. Gọi hotline hoặc gửi yêu cầu để nhận giá, tồn kho và thời gian giao. Hàng chính hãng Cisco, đủ CO/CQ, xuất hoá đơn VAT, bảo hành theo chính sách Cisco Việt Nam.
Thông số kỹ thuật Cisco Catalyst 1300-24FP-4G-EU
| Mã sản phẩm | C1300-24FP-4G-EU |
|---|---|
| Dòng | Cisco Catalyst 1300 Series |
| Cổng truy cập | 24 x 10/100/1000 PoE+ đủ công suất |
| Uplink | 4 x 1G SFP |
| Băng thông chuyển mạch | 56 Gbps |
| Tốc độ chuyển tiếp | 41.67 Mpps |
| Quản trị | Web GUI, CLI, SNMP, Cisco Business Dashboard, ứng dụng Cisco Business Mobile |
| Lớp | Layer 3 (định tuyến tĩnh, RIP, IPv6) |
| Bảo mật | 802.1X, ACL, DHCP snooping, IP Source Guard, Dynamic ARP Inspection |
| Quạt | Quạt tích hợp |
| Bảo hành | Trọn đời có giới hạn của Cisco |
| Switching capacity and forwarding rate – Capacity in Millions of Packets Per Second (mpps) (64-byte packets) | 41.67 |
|---|---|
| Switching capacity and forwarding rate – Switching capacity in Gigabits per second (Gbps) | 56 |
| 802.3at PoE+, 802.3af PoE – Power dedicated to PoE | 375W |
| 802.3at PoE+, 802.3af PoE – Number of ports that support PoE | 24 |
| Power consumption – System power consumption | 110V=36.9W 220V=37.2W |
| Power consumption – Power consumption (with PoE) | 110V=452.3W 220V=436.9W |
| Power consumption – Heat dissipation (BTU/hr) | 1542.3 |
| Power consumption – Idle Power | 110V=21.7W 220V=22.5W |
| Ports – Total system ports | 28 x Gigabit Ethernet |
| Ports – RJ-45 ports | 24 x Gigabit Ethernet |
| Ports – Combo ports (RJ-45 + Small Form-Factor Pluggable [SFP]) | 4 x SFP |
| Packet buffer – All numbers are aggregate across all ports, as the buffers are dynamically shared: – Packet buffer | 1.5 MB |
| Spanning Tree Protocol | Standard 802.1d Spanning Tree support Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default Multiple Spanning Tree instances using 802.1s (MSTP); 16 instances are supported Per-VLAN Spanning Tree Plus (PVST+) and Rapid PVST+ (RPVST+); 126 instances are supported |
| Port grouping/link aggregation | ● Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) ● Up to 8 groups ● Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation |
| VLAN | Support for up to 4094 VLANs (4078 – 4094 are for internal usage) simultaneously Port-based and 802.1Q tag-based VLANs, MAC-based VLAN, protocol-based VLAN, IP subnet-based VLAN Management VLAN Private VLAN with promiscuous, isolated, and community port Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks Guest VLAN, unauthenticated VLAN Dynamic VLAN assignment via RADIUS server along with 802.1X client authentication Customer premises equipment (CPE) VLAN Auto surveillance VLAN (ASV) |
| Voice VLAN | Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers networkwide zero-touch deployment of voice endpoints and call control devices |
| Multicast TV VLAN | Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR) |
| VLAN translation | Support for VLAN one-to-one mapping, in which customer VLANs (C-VLANs) on an edge interface are mapped to service provider VLANs (S-VLANs), and the original C-VLAN tags are replaced by the specified S-VLAN |
| Q-in-Q | VLANs transparently cross a service provider network while isolating traffic among customers |
| Selective Q-in-Q | Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs Selective Q-in-Q also allows configuring of the Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag Layer 2 protocol tunneling over Q-in-Q is also supported |
| Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) | GVRP and GARP enable automatic propagation and configuration of VLANs in a bridged domain |
| Unidirectional Link | UDLD monitors physical connections to detect unidirectional links caused by incorrect |
| Detection (UDLD) | wiring or cable/port faults to prevent forwarding loops and blackholing of traffic in switched networks |
| DHCP relay at Layer 2 | Relay of DHCP traffic to a DHCP server in a different VLAN; works with DHCP Option 82 |
| Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping | ● IGMP limits bandwidth-intensive multicast traffic to only the requesters; it supports 2000 multicast groups (in C1300 1 Gigabit Ethernet SKUs) and 4000 multicast groups (in C1300 10 Gigabit Ethernet SKUs and C1300X SKUs) ● Source-specific multicasting is also supported |
| IGMP querier | IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router |
| IGMP proxy | The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols |
| Loopback detection | Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP |
| IPv4 routing | Wire-speed routing of IPv4 packets ● Up to 990 (Dynamic + Static) IPv4 routes and up to 128 IP interfaces in C1300 ● Up to 7168 (Dynamic + Static) IPv4 routes and up to 256 IP interfaces in C1300 10 Gigabit Ethernet SKUs and C1300X SKUs |
| IPv6 routing | Wire-speed routing of IPv6 packets |
| Layer 3 interface | Configuration of a Layer 3 interface on a physical port, LAG, VLAN interface, or loopback interface |
| Routing Information Protocol (RIP) v2 | Support for RIP v2 for dynamic routing |
| Policy-Based Routing (PBR) | Flexible routing control to direct packets to a different next hop based on an IPv4 or IPv6 Access Control List (ACL) |
| Open Shortest Path First (OSPF) | Support for OSPF v2 and v3 (in C1300X SKUs only) |
| DHCP server | Switch functions as an IPv4 DHCP server, serving IP addresses for multiple DHCP pools or scopes Support for DHCP options |
| User Datagram Protocol (UDP) relay | Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets |
| High availability | Fast stack failover delivers minimal traffic loss. Support for LAG across multiple units in a stack |
| Plug-and-play stacking configuration/ management | Active/standby for resilient stack control Auto-numbering Hot swap of units in stack Ring and chain stacking options, auto stacking port speed, flexible stacking port options |
| High-speed stack interconnects | Cost-effective high-speed 10 Gigabit Ethernet fiber interfaces |
| Secure Shell (SSH) Protocol | SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported |
| Secure Sockets Layer (SSL) | SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch |
| IEEE 802.1X (authenticator role) | 802.1X: RADIUS authentication and accounting, MD5 hash, guest VLAN, unauthenticated VLAN, single/multiple host mode, and single/multiple sessions Supports time-based 802.1X, dynamic VLAN assignment, and MAC authentication |
| IEEE 802.1X supplicant | A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms) |
| Web-based authentication | Web-based authentication provides network admission control through a web browser to any host devices and operating systems |
| STP Bridge Protocol Data Unit (BPDU) Guard | A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops |
| STP Root Guard | Prevents edge devices not in the network administrator’s control from becoming STP root nodes |
| STP loopback guard | Provides additional protection against Layer 2 forwarding loops (STP loops) |
| DHCP snooping | Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP servers |
| IP Source Guard (IPSG) | When IPSG is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. This prevents IP address spoofing |
| Dynamic ARP Inspection (DAI) | The switch discards ARP packets from a port if there are no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination addresses in the ARP packet. This prevents man-in-the-middle attacks |
| IP/MAC/port binding (IPMB) | The preceding features (DHCP snooping, IP Source Guard, and Dynamic ARP Inspection) work together to prevent Denial of-Service (DoS) attacks in the network, thereby increasing network availability |
| Secure Core Technology (SCT) | Makes sure that the switch will receive and process management and protocol traffic no matter how much traffic is received |
| Secure Sensitive Data (SSD) | A mechanism to manage sensitive data (such as passwords, keys, and so on) securely on the switch, populating this data to other devices and a secure auto-configuration. Access to view the sensitive data as plain text or encrypted is provided according to the user configured access level and the access method of the user |
| Trustworthy systems | Trustworthy systems provide a highly secure foundation for Cisco products Run-time defenses (Executable Space Protection [X-Space], Address Space Layout Randomization [ASLR], Built-In Object Size Checking [BOSC]) |
| Private VLAN | Provides security and isolation between switch ports, which helps ensure that users cannot snoop on other users’ traffic; supports multiple uplinks. |
| Layer 2 isolation Private VLAN Edge (PVE) | PVE (also known as protected ports) provides Layer 2 isolation between devices in the same VLAN; supports multiple uplinks |
| Port security | Ability to lock source MAC addresses to ports and limit the number of learned MAC addresses |
| RADIUS/TACACS+ | Supports RADIUS and TACACS authentication. Switch functions as a client |
| RADIUS accounting | The RADIUS accounting functions allow data to be sent at the start and end of services indicating the number of resources (such as time, packets, bytes, and so on) used during the session |
| Storm control | Broadcast, multicast, and unknown unicast |
| Multiple user privilege levels in CLI | Level 1, 7, and 15 privilege levels |
| ACLs | Support for up to 1024 rules (in Catalyst 1300 1Gigabit Ethernet SKUs) and up to 2048 rules (in Catalyst 1300 10Gigabit Ethernet SKUs) and 3072 rules (in Catalyst 1300X SKUs) Drop or rate limit based on source and destination MAC, VLAN ID, IPv4 or IPv6 address, IPv6 flow label, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, TCP/UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag; ACL can be applied on both ingress and egress sides Time-based ACLs supported |
| Priority levels | 8 hardware queues |
| Scheduling | Strict priority and Weighted Round-Robin (WRR) |
| Class of service | Port-based, 802.1p VLAN priority-based, IPv4/IPv6 IP precedence/Type of Service (ToS)/DSCP-based, Differentiated Services (DiffServ), classification and remarking ACLs, trusted QoS Queue assignment based on DSCP and Class of Service (802.1p/CoS) |
| Rate limiting | Ingress policer; egress shaping and rate control per VLAN, per port, and flow based; dualrate 3-color (2R3C) policing |
| Congestion avoidance | A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization |
| iSCSI traffic optimization | A mechanism for giving priority to iSCSI traffic over other types of traffic |
| Standards | IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad Link Aggregation Control Protocol, IEEE 802.3z Gigabit Ethernet, IEEE 802.3ae 10 Gbps Ethernet over fiber for LAN, IEEE 802.3an 10GBASE-T 10 Gbps Ethernet over copper twisted pair cable, IEEE 802.3x Flow Control, IEEE 802.1D (STP, GARP, and GVRP), IEEE 802.1Q/p VLAN, IEEE 802.1w Rapid STP, IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, IEEE 802.3at, IEEE 802.1AB Link Layer Discovery Protocol, IEEE 802.3az Energy Efficient Ethernet, RFC 768, RFC 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 826, RFC 879, RFC 896, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 920, RFC 922, RFC 950, RFC 951, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1157, RFC 1213, RFC 1215, RFC 1286, RFC 1350, RFC 1442, RFC 1451, RFC 1493, RFC 1533, RFC 1541, RFC 1542, RFC 1573, RFC 1624, RFC 1643, RFC 1700, RFC 1757, RFC 1867, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2030, RFC 2131, RFC 2132, RFC 2233, RFC 2576, RFC 2616, RFC 2618, RFC 2665, RFC 2666, RFC 2674, RFC 2737, RFC 2819, RFC 2863, RFC 3164, RFC 3176, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC 3416, RFC 4330 |
| IPv6 | IPv6 host mode, IPv6 over Ethernet, dual IPv6/IPv4 stack IPv6 neighbor and router discovery (ND), IPv6 stateless address auto-configuration, path Maximum Transmission Unit (MTU) discovery Duplicate Address Detection (DAD), ICMP version 6 DHCPv6 stateful client IPv6 over IPv4 network with Intrasite Automatic Tunnel Addressing Protocol (ISATAP) tunnel support |
| IPv6 QoS | Prioritize IPv6 packets in hardware |
| IPv6 ACL | Drop or rate-limit IPv6 packets in hardware |
| IPv6 First Hop Security | RA guard ND inspection DHCPv6 guard Neighbor binding table (snooping and static entries) Neighbor binding integrity check |
| Multicast Listener Discovery (MLD v1/2) snooping | Deliver IPv6 multicast packets only to the required receivers |
| MLD proxy | The MLD proxy provides a mechanism for multicast forwarding based on MLD membership information without the need for more complicated multicast routing protocols |
| IPv6 applications | Web/SSL, Telnet server/SSH, ping, traceroute, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), SNMP, RADIUS, syslog, DNS client, Telnet client, DHCP client, DHCP auto-config, IPv6 DHCP relay, TACACS+ |
| IPv6 RFCs supported | RFC 4443 (which obsoletes RFC 2463): ICMP version 6 RFC 4291 (which obsoletes RFC 3513): IPv6 address architecture RFC 4291: IPv6 addressing architecture RFC 2460: IPv6 specification RFC 4861 (which obsoletes RFC 2461): neighbor discovery for IPv6 RFC 4862 (which obsoletes RFC 2462): IPv6 stateless address auto-configuration RFC 1981: path MTU discovery RFC 4007: IPv6 scoped address architecture RFC 3484: default address selection mechanism RFC 5214 (which obsoletes RFC 4214): ISATAP tunneling RFC 4293: MIB IPv6: textual conventions and general group RFC 3595: textual conventions for IPv6 flow label |
| Cisco Business Dashboard | Support for embedded probe for Cisco Business Dashboard running on the switch. Eliminates the need to set up a separate hardware or virtual machine for the Cisco Business Dashboard Probe onsite |
| Cisco Business mobile app | Mobile app for Cisco Business and Catalyst 1200 and 1300/X switches and wireless products. Helps to set up a local network in minutes and provide easy management at your fingertips |
| Cisco Network Plug and Play (PnP) agent | The Cisco Network PnP solution provides a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or for provisioning updates to an existing network. The solution provides a unified approach to provision Cisco routers, switches, and wireless devices with a near-zero-touch deployment experience. Supports Cisco PnP Connect |
| Web user interface | Built-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS) Supports simple and advanced mode, configuration, wizards, customizable dashboard, system maintenance, monitoring, online help, and universal search |
| SNMP | SNMP versions 1, 2c, and 3 with support for traps, and SNMP version 3 User-Based Security Model (USM) |
| Remote Monitoring (RMON) | Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis |
| IPv4 and IPv6 dual stack | Coexistence of both protocol stacks to ease migration |
| Firmware upgrade | Web browser upgrade (HTTP/HTTPS) and TFTP and upgrade over SCP running over SSH Dual images for resilient firmware upgrades |
| Port mirroring | Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 8 source ports can be mirrored to one destination port |
| VLAN mirroring | Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 8 source VLANs can be mirrored to one destination port |
| Flow-based redirection and mirroring | Redirect or mirror traffic to a destination port or mirroring session based on flow |
| Remote Switch Port Analyzer (RSPAN) | Traffic can be mirrored across a Layer 2 domain to a remote port on a different switch for easier troubleshooting |
| sFlow agent | Switch can export sFlow sample to external collectors. sFlow provides visibility into network traffic down to the flow level |
| DHCP (options 12, 59, 60, 66, 67, 82, 125, 129, and 150) | DHCP options facilitate tighter control from a central point (DHCP server) to obtain IP address, auto-configuration (with configuration and image file download), DHCP relay, and hostname |
| Secure Copy (SCP) | Securely transfer files to and from the switch |
| Auto-configuration with SCP file download | Enables secure mass deployment with protection of sensitive data |
| Text-editable configuration files | Configuration files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment |
| Smartports | Simplified configuration of QoS and security capabilities |
| Auto Smartports | Applies the intelligence delivered through the Smartport roles and applies it automatically to the port based on the devices discovered over Cisco Discovery Protocol or LLDP-MED. This facilitates zero-touch deployments |
| Text view CLI | Scriptable CLI. A full CLI as well as a menu-based CLI is supported. User privilege levels 1, 7, and 15 are supported for the CLI |
| Localization | Localization of GUI and documentation into multiple languages |
| Login banner | Configurable multiple banners for web as well as CLI |
| Other management | Traceroute, single IP management, HTTP/HTTPS, SSH, RADIUS, port mirroring, TFTP upgrade, DHCP client, BOOTP, SNTP, Xmodem upgrade, cable diagnostics, ping, syslog, Telnet client (SSH secure support), automatic time settings from management station |
| Energy detect | Automatically turns power off on an RJ-45 port when the detecting link down. Active mode is resumed without loss of any packets when the switch detects the link is up |
| Cable length detection | Adjusts the signal strength based on the cable length. Reduces the power consumption for shorter cables |
| EEE compliant (802.3az) | Supports IEEE 802.3az on all copper Gigabit Ethernet ports |
| Disable port LEDs | LEDs can be manually turned off to save energy |
| Time-based port operation | Link up or down based on user-defined schedule (when the port is administratively up) |
| Time-based PoE | PoE power can be on or off based on a user-defined schedule to save energy |
| Persistent PoE | Provides PoE power while the device is rebooting |
| Jumbo frames | Frame sizes up to 9000 bytes. The default MTU is 2000 bytes |
| MAC table | 16,000 addresses (in Catalyst 1300 1 Gigabit Ethernet SKUs) and up to 32,000 rules (in Catalyst 1300 10 Gigabit Ethernet SKUs and Catalyst 1300X SKUs) |
| Chip guard | Detects tampering attempts and responds during bootup |
| Boot integrity | Boot integrity visibility allows Cisco's platform identity and software integrity information to be visible and actionable |
| Bonjour | The switch advertises itself using the Bonjour protocol |
| Cisco Discovery Protocol | The switch advertises itself using the Cisco Discovery Protocol. It also learns the connected device and its characteristics via Cisco Discovery Protocol |
| 802.3at PoE+, 802.3af PoE | The following switches support 802.3at PoE+, 802.3af, and Cisco pre-standard (legacy) PoE. The total power available for PoE per switch is as follows: |
| 802.3bt PoE++, 802.3at PoE+ | The following switches support 802.3bt (Type 3) PoE++ and 802.3at PoE+. The total power available for PoE per switch is as follows: |
| Console port | Cisco standard RJ-45 console port and USB Type C port |
| USB port | USB Type C port on the front panel of the switch for easy file and image management as well as console port |
| Cabling type | Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T |
| Flash | 1GB SLC |
| CPU | ARM dual-core at 1.5 GHz |
| DRAM | 1 GB DDR4 (C1300); 2 GB DDR4 (C1300X) |
| Packet buffer | All numbers are aggregate across all ports, as the buffers are dynamically shared: |
| Unit dimensions | 444.3 x 350 x 43.94 mm (17.49 x 13.77 x 1.73 in) |
|---|---|
| Unit weight | 4.6 kg (10.14 lb) |
| Acoustic noise and mean time between failures – FAN (number) | 1 |
| Acoustic noise and mean time between failures – Acoustic noise | 25°C: 39 dBA |
| Acoustic noise and mean time between failures – MTBF at 25°C (hours) | 500,161 |
| Power | 100-240V 50-60 Hz, internal, universal: C1300-8FP-2G, C1300-16T-2G, C1300-16P-2G,C1300-16FP-2G, C1300-24T-4G, C1300-24P-4G, C1300-24FP-4G, C1300-48T-4G, C1300-48P-4G, C1300-48FP-4G, C1300-16P-4X, C1300-24T-4X, C1300-24P-4X, C1300-24FP-4X, C1300-48T-4X, C1300-48P-4X, C1300-48FP-4X, C1300-12XT-2X, C1300-12XS, C1300-16XTS, C1300-24XS, C1300-24XT, C1300-8MGP-2X, C130024MGP-4X, C1300-48MGP-4X, C1300-24XTS, C1300X-24T-4X, C1300X-48T-4X, C1300X-24P-4X, C1300X-48P-4X, C1300X-24MU-4X, C1300X-10NU-2X, C1300X-24NGU-4X, C1300X-48NGU-4X. 100-240V 50-60 Hz, external: C1300-8T-E-2G, C1300-8P-E-2G, |
| Certifications | UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A |
| Operating temperature | 23° to 122°F (-5° to 50°C) C1300-8T-E-2G, C1300-8P-E-2G, C1300-8FP-2G, C1300-16T-2G, C1300-16P-2G, C1300-16FP-2G, C1300-24T-4G, C1300-24P-4G, C1300-24FP-4G, C1300-48T-4G, C1300-48P-4G, C1300-48FP-4G, C1300-16P-4X, C1300-24T-4X, C1300-24P-4X, C1300-24FP-4X, C1300-48T-4X, C1300-48P-4X, C1300-48FP-4X, C1300-8MGP-2X, C1300-12XT-2X, C1300-12XS, C1300-16XTS, C1300-24XS, C1300-24XT, C130024MGP-4X, C1300-48MGP-4X, C1300-24XTS, C1300X-24T-4X, C1300X-48T-4X, C1300X-24P-4X, C1300X-48P-4X, C1300X-24MU-4X, C1300X-10NU-2X, C1300X-24NGU-4X, C1300X-48NGU-4X. Minimum ambient temperature for cold start is 32°F (0°C ) |
| Storage temperature | -13° to 158°F (-25° to 70°C) |
| Operating humidity | 10% to 90%, relative, noncondensing |
| Storage humidity | 10% to 90%, relative, noncondensing |
| Warranty | Limited lifetime with return-to-factory replacement |
Mục Lục Cisco Catalyst 1300-24FP-4G-EU
Cam kết hoàn tiền gấp 100 lần nếu phát hiện sản phẩm Cisco Catalyst 1300-24FP-4G-EU kém chất lượng từ Hợp Nhất groupMua cùng Cisco Catalyst 1300-24FP-4G-EU ?
Sản phẩm cùng loại
Thông tin liên hệ
Hồ Chí Minh: 028.62959919
Máy bàn Hà Nội: 024.22255666
Số di động tư vấn: 0522 388 688
Email: info@thietbimangcisco.vn
Mua sản phẩm Cisco Catalyst 1300-24FP-4G-EU tại Hợp Nhất nhà cung cấp thiết bị mạng Cisco uy tín, danh tiếng 10 năm để đảm bảo sản phẩm chính hãng. Tránh nguy cơ mua phải sản phẩm kém chất lượng...
Câu hỏi thường gặp